Search
Now showing items 1-10 of 26
Effect of the aging process on mechanical properties and machinability in AA6013 aluminum alloys
(Academic Journals, 2015)
This study investigated the effects of aging process on the mechanical properties and machinability in AA6013 aluminum alloy. To this end, AA6013 aluminum alloy samples were maintained in heat treatment furnace at 530°C ...
Alüminyum Alaşımlarında Yaşlandırma İşleminin Mekanik Özellikler ve İşlenebilirlik Üzerindeki Etkisi
(Bilecik Şeyh Edebali Üniversitesi, 2014)
Bu çalışmada, AA6013 ve AA6082 alüminyum alaşımlarında yaşlandırma işleminin alaşımın mekanik
özellikleri ve işlenebilirlik özellikleri üzerine etkileri incelenmiştir. Bu amaçla, deneyde kullanılan AA6082 ve
AA6013 ...
Pine Cone and Boron Compounds Effect as Reinforcement on Mechanical and Flammability Properties of Polyester Composites
(ICCESEN, 2017)
In recent years focus on the development of natural fiber composites has been increased due to their superior properties such as light-weight, high strength and stiffness. Natural fibers are known environmentally friendly ...
Effect of Chemical Treatment on Polyester Matrix Composites Reinforced with Chestnut Waste
(Türkiye Biyologlar Derneği, 2016)
In recent years due to same ecologtal and environmental apprehension [n the fabrication of thermoplastic composites natural fibers have been preferred instead af using inorganic fillers. The increasing demand for thermoplastic ...
Production of Polyester Composite Material Using Pine Cone Powder as Reinforcement
(Bilkent Üniversitesi, 2016)
Natural fibers reinforced polymer composites have a large area as a progressive material in such industrial applications. Although pine cones have the fibrillar morphology and good mechanical properties they are unusually ...
Machinabiltiy Effect on 6013 Aluminum Alloys in Aging Heat Treatment
(Yıldız Teknik Üniversitesi, 2013)
Aluminum alloys that have specific strength, good corrosion resistance are used in many fields such as aerospacc and automotive, because, they have improved the mechanical propertics of the alloys with aging heat treatment. ...
Effect of Si content on machinability of Al-Si alloys casted sand and metal moulds
(Kastamonu Üniversitesi, 2018)
This study investigates the effect of Zinc (Zn), Silicon (Si) and Mangan (Mn) in (AZ91: 2% Al, 1% Zn, AS21: 2% Al, 1% Si, and AM20: 2% Al, 0.5% Mn) magnesium alloys on mechanical properties, wear resistance and machinability. ...
Machinability of AZ21, AS21 and AM20 Magnesium Alloys
(Kastamonu Üniversitesi, 2018)
This study investigates the effect of metal and sand moulds casting (solidification or cooling rate) and increase of %Si content in Al-Si (Aluminium-Silicon) cast alloys on mechanical properties and machinability properties.
Preparation and Characterization of Epdm Rubber Mixture for a Heat Resistant Conveyor Belt Cover
(Anadolu Üniversitesi, 2017)
In this paper, the EPDM rubber-based dough recipe for a conveyor belt used in high temperature conditions was developed. As a first step, the silica loading effect on the mechanical and rheological properties was determined. ...
Production of Polyester CompositeMaterial Using Pine Cone Powderas Reinforcement
(IJOPEC Publication, 2016)
Natural fiber reinforced polymer composites have much potential as a progressive material in many industrial applications. Although pine cones have fibril morphology and good mechanical properties they are rarely used as ...