Yayın tarihi için M-MYO_Yayın Koleksiyonu listeleme
Toplam kayıt 66, listelenen: 1-20
-
Some physical effects of reaction rate on PbS thin films obtained by chemical bath deposition
(Elsevier, 2013)Thin films of polycrystalline lead sulfide (PbS) have been deposited on glass substrates at 303±1 K using chemical bath deposition (CBD). The precipitation of PbS on solid surfaces under four different reaction conditions ... -
Synthesis and Characterization of CdS Nanocrystals Produced by Using a Novel Stabilizer
(2014)During the last decade, semiconductor nanoparticles have attracted great interest due to size dependent changes over some of their physical properties such as optical properties and photocatalytic activity etc [1,2]. CdS ... -
Effect of Potential on Structural, Morphological and Optical Properties of ZnO Thin Films Obtained by Electrodeposition
(David Publishing Company, 2015)Polycrystal ZnO thin films have been deposited on ITO coated glass substrate in two different potential of -0.85 V and -0.95 V by electrochemical deposition technique using 0.005 M ZnCl2 or 0.01 M (Zn(NO3)2·6H2O) ... -
The Removal of Linear Alkyl Benzene Sulphonic Acid Labsa From Aqueous Solution on Bottom Ash Obtained from Combustion of Lower Rank Lignite Coal As Adsorbent
(2015)Linear alkyl benzene sulphonic acid (LABSA) is the major anionic surfactant material used in detergent formulations so that it is frequently present in domestic and civil wastewater. Sulphate can cause various kinds of ... -
Adsorption Behaviors for Sequestration of Anionic Surfactant (Linear Alkyl Benzene Sulphonic Acid, LABSA) from Aqueous Solution on the Solid Product (CHAR) Obtained from the Waste Tyre Rubber Via Chemical Devulcanization
(2015)Surfactants or surface active agents have a wide range of applications in industries, agriculture, textile, detergent, food, cosmetics and the drug or pharmaceutical (Cuzzola, Bernini and Salvadori, 2002). Adsorption of ... -
Effects Of Inhibitor On Pbs Thin Films Obtained By Chemical Bath Deposition
(Springer, 2015)Thin films of polycrystalline lead sulfide (PbS) have been deposited on glass substrates by chemical bath deposition at 20 ± 1 °C in alkaline solutions. Aqueous solutions of lead nitrate (Pb(NO3)2), potassium hydroxide ... -
Effects of External Alternating Magnetic Field on ZnO Films Obtained by Electrodeposition
(Springer, 2015)Zinc oxide (ZnO) films have been prepared by electrodeposition from aqueous solutions of Zn(NO3)2 · 6H2O on indium tin oxide substrates applying both classical and modified methods. In the modified method, two coils ... -
Multi-responsive microgel of a water-soluble monomer via emulsion polymerization
(2015)Microgel of a water-soluble monomer [2-(N-morpholino)ethyl methacrylate (MEMA)] was successfully prepared in aqueous media via emulsion polymerization by using a novel water-soluble block copolymer as stabilizer. ... -
Simulink Model of Parallel Resonant Inverter with DSP Based PLL Controller
(Kaunas University of Technology, 2015)Resonant converters can operate at high switching frequencies with low switching losses. However, in order to reduce switching losses resonant frequency has an important role in the design. In this study, a DSP based ... -
Effect of Marble: Pine Cone Waste Ratios on Mechanical Properties of Polyester Matrix Composites
(Springer, 2015)There is ongoing research interest in finding alternative sources of materials for composite manufacturing. Therefore, alternative non-wood based materials may play an important role in the forest product industry. Natural ... -
Comparison of Waste Heat Recovery Performances of Plate-Fin Heat Exchangers Produced from Different Materials
(HIKARI, 2015)High amount of waste heat emerging from thermal processes performed in the industry can be recovered by means of equipment such as heat pipes, heat exchangers and heat recovery boilers. In this study, thermal performance ... -
CdO Films Obtained by Electrodeposition at -0.5 V and -0.7 V Potentials Range
(David Publishing Company, 2016)Thin films of CdO were produced by electrodeposition at -0.5, -0.6 and -0.7 V. As voltage increased the band gap increased from 2.23 to 2.35 eV proportionally. The film thicknesses were affected by ... -
Removal of Pollutants from Waste Foundry Sand by Chemical Washing Method
(2016)The purpose of this research was to remove of metallic contaminant and other pollutants from waste foundry sand(WFS) by chemical washing method. Firstly, experimental investigation for removing of metallic contaminant and ... -
A New Land Modeling and Application that can be used in Wind Energy Potential Determination
(Scientific & Academic Publishing, 2017)The determination of the wind energy potential for a selected region is crucial in the decision to establish eficient wind systems. The surface roughness of the land, the obstacles in the active wind direction and the ... -
Influence of Silane on The Structure of Polystyrene Prepared by Sol-Gel Coatings via UV Curing
(2017)Light, heat, oxygen, moisture, ozone, atmospheric pollution and biological effects are the most important effectives wreak to chemical degradation in the polymer structure. In result of chemical degradation on the polymer ... -
Some physical properties of the ZnO films obtained by electrodeposition using Zn(NO3).6H2O aqueous solution at different cathodic potentials
(Sakarya Üniversitesi, 2017)Polycrystalline ZnO films prepared by electrodeposited on ITO coated glass substrate at different cathodic potential were investigated. In all experiments Zn(NO3).6H2O aqueous solution was used as an electrolyte and ... -
ZnO Films Obtained by Electrodeposition Under Alternating Magnetic Field
(Bülent Ecevit Üniversitesi, 2017)Tin films of polycrystalline ZnO were produced by electrodeposition under alternating magnetic field. Te structures of the films deposited under a magnetic field were defined by X-ray diffractometer (XRD) and it revealed ... -
Effects of concentration on CdO films grown by electrodeposition
(Springer, 2017)Thin films of CdO were synthesized by electrodeposition via chronoamperometry. The concentrations of aqueous solutions of Cd(NO3)2 were chosen between 0.005 and 0.08 M. It was thought that the reaction rate would reach ... -
An investigation of effects of bath temperature on CdO films prepared by electrodeposition
(Springer, 2017)CdO thin films were prepared by electrodeposition method. Solution temperatures were varied from 58 to 98 C. It was understood from the film thicknesses and current densities that the reaction rate increased as ... -
Pulse density modulation controlled converter for PV systems
(Pergamon-Elsevier Science, 2017)This paper presents a pulse density modulation (PDM) controlled resonant converter for photo-voltaic (PV) system. Maximum power point of the PV generation system is tracked by deleting some control pulses of full bridge ...