Influence of Silane on The Structure of Polystyrene Prepared by Sol-Gel Coatings via UV Curing
MetadataShow full item record
CitationBalbay, S., & Acıkgoz, C. (2017). Influence of silane on the structure of polystyrene prepared by sol-gel coatings via UV curing. In E3S Web of Conferences (Vol. 22, p. 00007). EDP Sciences.
Light, heat, oxygen, moisture, ozone, atmospheric pollution and biological effects are the most important effectives wreak to chemical degradation in the polymer structure. In result of chemical degradation on the polymer consist of problems such as discoloration, brittleness, surface cracks, perspiration, crumbling, smell, surface acidity. In this work, it is aimed to improve the problem of the polystyrene (PS) material against chemical degradation. For this reason, PS is coated with silica sol-gel hybrid coating. Silica sol-gel was synthesized by using vinyltrimethoxysilane (VTMS) as a cross-linker and tetraethylorthosilicate (TEOS) as a silica source. Firstly, four different pre-treatment technique (oven, vacuum oven, lyophilizer and freezing) was studied to determine the most suitable pre-treatment technique for coating on PS substrate of sol-gel prepared with initial formulation (S1). A freezing technique gave the best results for coating sample. The change of surface colour of coated PS was measured by CIE L*a*b* methods. Secondly, the most suitable curing agent (Irgacure 184, Irgacure 819, Darocur 1173 and TiO2 as crystalline anatase phase) was determined to coat the sol-gel on PS. It was determined to the lowest yellowing of PS surface hybrid coated as UV curing of TEOS sol modified by VTMS and TiO2 as photo-initiators. Finally, the chemical and morphological structure of the coated PS samples was determined by FT-IR and SEM instruments,respectively.