• Advanced exergoenvironmental assessment of a building from the primary energy transformation to the environment 

  Açıkkalp, Emin; Hepbaşlı, Arif; Yücer, Cem Tahsin; Karakoç, Tahir Hikmet (Elsevier, 2015)

  Buildings are of great importance in terms of consumption of energy all over the world. Building sector has a significant influence over the total natural resource consumption and is significant contributors of greenhouse ...

• Investigation of the Flow Over NACA 63-415 Airfoil 

  Erkan, Onur; Özkan, Musa (Uğur ŞEN, 2020)

  In this article, a two-dimensional, incompressible flow around a NACA 63-415 airfoil, which is widely used as one of the commercial wind turbine blade profiles, is investigated. The goal of this research is to obtain the ...

• Investigation Of Aerodynamic Performance Characteristics Of A Wind-Turbine-Blade Profile Using The Finite-Volume Method 

  Erkan, Onur; Özkan, Musa; Karakoç, Tahir Hikmet; Garrett, Stephen J; Thomas, Peter J (Pergamon-Elsevier Science, 2020)

  Two-dimensional incompressibleflow around a NACA 63e415 airfoil, which is encountered in engi-neering applications as a typical wind-turbine-blade profile, is investigated computationally. Aero-dynamic loads and theflow ...

• The Effects of Globalisation And Technological Improvements On Vocational And Technical Education 

  Akyüz, Birol; Akyüz, Gülşen Çetin (International Burch University, 2009)

  At the beginning of the 21st century, it's seen that countries find themselves in a competition of information and technology and that they have taken a long distance on the way of becoming communities of knowledge. In ...

• The Effects of Concurrent Product Development on Product Development Performance 

  Yayla, Yeşim; Akyüz, Birol (International Burch University, 2009)

  The intensive competition in global world markets has shown that existence of enterprises is only possible by ensuring customer satisfaction. Ensuring customer satisfaction is possible by developing products that can meet ...

• Farklı Malzemelerin Aşındırıcılı Sujeti ile işlenebilirliğinin Araştırılması (Investigation of Machinability Different Materials by Abrasive Waterjet)”, 

  Onur, Aslı; Akyüz, Birol (Sakarya Üniversitesi, 2011)

  Suyun aşındırma etkisiyle oluşturduğu akarsuları, vadileri gören araştırmacılar bu gücü kontrol altına alarak endüstride kullanma yollarım araştırmışlardır. 70'li yıllarda kullanılmaya başlanan bu sistem başlangıçta pahalı, ...

• AZ91 Magnezyum Alaşımının İşlenebilirliği (Machinability of AZ91 Magnesium Alloy,Machinability of Magnesium) 

  Akyüz, Birol (Sakarya Üniversitesi, 2011)

  The increase in environmental pollution and the decrease of energy resources attached importance to both ecological and environmentalist designs. Therefore, today meeting the requirements of less fuel consumption in the ...

• Machinabiltiy Effect on 6013 Aluminum Alloys in Aging Heat Treatment 

  Akyüz, Birol; Şenaysoy, Safa (Yıldız Teknik Üniversitesi, 2013)

  Aluminum alloys that have specific strength, good corrosion resistance are used in many fields such as aerospacc and automotive, because, they have improved the mechanical propertics of the alloys with aging heat treatment. ...

• Su jetiyle işleme ve Eko-Tasarım İlişkisi 

  Akyüz, Birol; Kocabaş, Ceyda; Onur, Aslı (Uşak Üniversitesi, 2012)

  Günümüz tüketim dünyasında ürünlerin müşteri isteğini karşılamasının yanı sıra, ürünlerin çevreye ve insan sağlığına önem veren bir çerçevede üretilmesi, sunulması ve ürün yaşam çevrimi boyunca bu özelliğini koruması hayati ...

• Ürün Geliştirme Çalışmalarını Hızlandırmada Kullanılan Araç ve Yöntemler 

  Yayla, Yeşim; Akyüz, Birol (Çankaya Üniversitesi, 2009)

  Dünyada küreselleşmenin getirdiği rekabet koşulları, sürekli ve hızlı değişen müşteri ihtiyaç ve beklentileri, ürün yaşam çevrimin kısalması gibi nedenler işletmelerin ürün geliştirme çalışmalarına önem vermelerini kaçınılmaz ...

• Hızlı Prototipleme Yöntemi ve Yönetimi Kullanım Alanlarının İncelenmesi 

  Akyüz, Birol; Esener, Emre; Demir, Oğuzhan (Çankaya Üniversitesi, 2010)

  Günümüzde teknolojinin hızla gelişmesiyle birlikte tasarımı ve imalatı yapılan parçalar da giderek daha karmaşık bir geometriye sahip olmaktadır. Rekabet sebebiyle bu karmaşık geometrileri hızlı ve ucuz bir şekilde üretmek ...

• Teknolojik Gelişmelerin ve Müşteri Beklentilerinin Mesleki Eğitim Kalitesi Üzerindeki Etkileri 

  Özevren, Mina; Akyüz, Birol (Selçuk Üniversitesi, 2009)

  In this century, we see that countries fınd themselves in a competition of information and technology and that they have taken a long distance on the way of becoming communities of knowledge. The fact that information gains ...

• Mesleki Eğitimde Toplam Kalite Yönetimi ve Müşteri Odaklılığın Önemi 

  Akyüz, Birol; Özevren, Mina (Selçuk Üniversitesi, 2009)

  The innovations and the developments in technology require new changes. And in accordance with these innovations and developments, the workers who work in industry need to change and improve their quality. In this study, ...

• Effects of Si and Mn on machinability and wear resistance of AS91 and AM90 magnesium alloys 

  Akyüz, Birol (Selçuk Üniversitesi, 2016)

  Abstract-This study investigates the effect of Silicon (Si) and Manganese (Mn) in AS91 (9% Al, 1% Si) and AM90 (9% Al, 0.5% Mn) magnesium alloys that are among important magnesium alloys wear resistance and machinability. ...

• AZ91 ve AM90 Magnezyum Alaşımlarında Çinko (Zn) Ve Manganın (Mn) Kesme Kuvvetleri Üzerine Etkisi 

  Akyüz, Birol (Marmara Üniversitesi, 2016)

  This study investigates the effect of Zinc (Zn) and Manganese (Mn) in AZ91 and AM90 magnesium alloys that are among important magnesium alloys mechanical properties, wear resistance and machinability. Intermetallic phases ...

• Machinability of AZ21, AS21 and AM20 Magnesium Alloys 

  Akyüz, Birol (Kastamonu Üniversitesi, 2018)

  This study investigates the effect of metal and sand moulds casting (solidification or cooling rate) and increase of %Si content in Al-Si (Aluminium-Silicon) cast alloys on mechanical properties and machinability properties.

• Effect of Si content on machinability of Al-Si alloys casted sand and metal moulds 

  Akyüz, Birol (Kastamonu Üniversitesi, 2018)

  This study investigates the effect of Zinc (Zn), Silicon (Si) and Mangan (Mn) in (AZ91: 2% Al, 1% Zn, AS21: 2% Al, 1% Si, and AM20: 2% Al, 0.5% Mn) magnesium alloys on mechanical properties, wear resistance and machinability. ...

• Effect of Silicon Content on Machinability of Al-Si Alloys 

  Akyüz, Birol (Society Polish Mechanical Engineers & Technicians, 2016)

  In this study the effect of the change in the amount of Silicon (Si) occuring in Al-Si alloys on mechanical and machinability properties of the alloy was investigated. The change in mechanical properties and microstructure, ...

• Numerical investigation of the effects of cone tip diameters on the efficiency of a cyclone separator 

  Kaya, Alaattin Metin; Özkan, Musa (Hibetullah KILIÇ, 2020)

  Cyclone separators, which are widely used in the cement industry, are very important in terms of preventing air pollution. Many studies on cyclone separators have been done for a long time by means of different models and ...

• Effect of the aging process on mechanical properties and machinability in AA6013 aluminum alloys 

  Akyüz, Birol; Şenaysoy, Safa (Academic Journals, 2015)

  This study investigated the effects of aging process on the mechanical properties and machinability in AA6013 aluminum alloy. To this end, AA6013 aluminum alloy samples were maintained in heat treatment furnace at 530°C ...

View more