A comparative study on corrosion of Mg-Al-Si alloys

Basit Öğe Kaydı
dc.authorid0000-0001-5549-9476
dc.authorid0000-0002-0610-5044
dc.authorscopusid6701794069
dc.authorscopusid6602100936
dc.authorwosidJ-3039-2015
dc.contributor.authorCandan, Şennur
dc.contributor.authorCandan, Ercan
dc.date.accessioned2023-05-29T12:20:15Z
dc.date.available2023-05-29T12:20:15Z
dc.date.issued2017en_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine ve İmalat Mühendisliği Bölümü
dc.description.abstractCorrosion behavior of various Mg−Al−Si alloys (AS11, AS21, AS41, AS61 and AS91 series), cast under the same cooling conditions and controlled alloying composition, was investigated systematically. Optical microscopy and scanning electron microscopy were used for microstructural examinations. The corrosion behavior was evaluated by immersion tests and potentiodynamic polarization measurements in 3.5% NaCl solution. The results from both immersion tests and the potentiodynamic polarization measurements showed that marginal improvement in corrosion resistance was observed with 2.0% Al (mass fraction) containing alloy (AS21) whereas Al addition above 2.0% (AS41, AS61 and AS91) deteriorated the corrosion resistance which was attributed to β phase, acting as cathode, and the interruption of continuity of the oxide film on the surface of the alloys owing to coarsened β and Mg2Si phases.en_US
dc.identifier.citationCANDAN, S., & CANDAN, E. (2017). A comparative study on corrosion of Mg–Al–Si alloys. Transactions of Nonferrous Metals Society of China (English Edition), 27(8), 1725-1734. doi:10.1016/S1003-6326(17)60195-Xen_US
dc.identifier.doi10.1016/S1003-6326(17)60195-X
dc.identifier.endpage1734en_US
dc.identifier.issn2210-3384
dc.identifier.issn1003-6326
dc.identifier.issue8en_US
dc.identifier.scopus2-s2.0-85029763681
dc.identifier.scopusOldid1-s2.0-S100363261760195X
dc.identifier.scopusqualityQ1
dc.identifier.startpage1725en_US
dc.identifier.urihttps/doi.org/10.1016/S1003-6326(17)60195-X
dc.identifier.urihttps://hdl.handle.net/11552/2995
dc.identifier.volume27en_US
dc.identifier.wosWOS:000414711700006
dc.identifier.wosqualityQ1
dc.identifier.wosqualityQ2
dc.indekslendigikaynakScopus
dc.indekslendigikaynakWoS
dc.indekslendigikaynakWoS - Science Citation Index Expanded
dc.institutionauthorCandan, Şennur
dc.institutionauthorCandan, Ercan
dc.language.isoen
dc.publisherElsevieren_US
dc.relation.ispartofTransactions of Nonferrous Metals Society of China
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subjectMg Alloyen_US
dc.subjectAS Series Alloysen_US
dc.subjectMicrostructureen_US
dc.subjectCorrosionen_US
dc.titleA comparative study on corrosion of Mg-Al-Si alloys
dc.typeArticle

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
1-s2.0-S100363261760195X-main.pdf
Boyut:
3.67 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Yayıncı Kopyası_Makale Dosyası
İndir

Lisans paketi

Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

MF_Yayın Koleksiyonu
Scopus İndeksli Yayınlar
WoS İndeksli Yayınlar